Groothandel CZCL A-300AB-5 LED Display Slim Netzteil 5V 60A 300W
Spesifikaasje
| Model | A-300AB-5 | ||||||
| Utfier | DC spanning | 5V | |||||
|
| Rated hjoeddeistige | 60A | |||||
|
| Aktuele berik | 0~60A | |||||
|
| Rated macht | 300W | |||||
|
| Ripple & Noise | 200 mVp-p | |||||
|
| Tage regeljouwing rûn | 4.5~5.5V | |||||
|
| Voltage accuracy | ±2.0% | |||||
|
| Line oanpassing rate | ± 0,5% | |||||
|
| Load oanpassing rate | ± 2% | |||||
| Rise | 3000ms, 50ms/230VAC 100% load | ||||||
| Hold up tiid (Typ) | 20ms/230VAC 100% lading | ||||||
| Ynfier | Voltage berik | 180~264VAC | |||||
| Frekwinsje berik | 47~63HZ | ||||||
| PFC (Typ) | PF≥0.5 | ||||||
| Effisjinsje (Typ) | ≥86% |
|
|
|
| ||
| Alterna ding | 15VAC | / |
|
|
|
| |
|
| 30VAC | 3.1A |
|
|
|
| |
| Rush stroom (Typ) | 60A/230VAC | ||||||
| Leakstroom | <1mA/230VAC | ||||||
| Beskerming | Over load | 110 ~ 150% wurdearre | |||||
|
| Koartsluting | ôfslute, AC recycle om opnij te begjinnen | |||||
|
| Oer spanning | spanning beheind 110% ~ 140% fan rated spanning | |||||
|
| Oer temperatuer. | / | |||||
| Miljeu
| Wurktemperatuer. | -20 ℃ ~ + 50 ℃ (AC 230V) (ferwize nei temperatuer derating kromme) | |||||
| Working Feuchte | 20 ~ 90% RH gjin kondensearjen | ||||||
| Opslach Temp. | -30~+85℃ | ||||||
| Opslach humiliteit | 10 ~ 95% RH gjin kondensearjen | ||||||
| Temp.koëffisjint | ±0.03%/℃ (0~50℃) | ||||||
| Vibraasje ferset | 10~500Hz, 2G, 10min/syklus, X, Y, Z 60min yn elke rjochting | ||||||
| Safety Standards | Untwerp ferwize nei GB4943, UL60950-1, EN60950-1 | ||||||
| Standert spanning | I/PO/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | ||||||
| solation ferset | I/PO/P, I/P-FG, O/P-FG:>50MΩ/500VDC/25℃/70%RH | ||||||
| EMC | Untwerp ferwize nei GB9254 EN55022, Klasse A | ||||||
| Harmonyske stroom | Untwerp ferwize nei GB17625.1;EN61000-3-2,-3 | ||||||
| EMS | Untwerp ferwize nei EN55024; EN61000-4-2,3,4,5,6,8,11 | ||||||
| Oaren | Lifetime | 100.000 oeren (25 ℃) | |||||
|
| Grutte | 212*81.5*31.1 (L*W*H) | |||||
|
| pakket | 0,55 kg/stk | |||||
| Opmerkingen | * Om it libben te ferlingjen, wurdt it oanrikkemandearre om de lading net mear as 30% fan 'e oerbleaune fergoeding te konfigurearjen.Bygelyks: de krêft fan it apparaat fereasket 100W, brûk dan de krêft fan minder dan 130W.* Ripple testmetoade: 20MHz oszilloskoop yn power output terminal test, oscilloscope sonde draad lingte is net mear as 12mm, en input parallelle 47uF elektrolytyske kondensators en 0.1uF hege frekwinsje capacitance sonde. | ||||||
Laadtemperatuer Derating Curve
Ynstallaasje Drawing
| Pin nr | Opdracht | Pin nr | Opdracht |
| 1~2 | AC/N | 6~8 | DC útfier (-V) |
| 3~4 | AC/L | 9~11 | DC-útfier (+V) |
| 5 | FG |
|
